Home All products Certificates Manuals Price list Online calculators Contacts
Ukraine
We work all over Ukraine
Mon-Thu, 8:00-17:00. Fri, 8:00-16:00
Sat, Sun - days off
Free online tool

Tank Calibration Calculator

Fuel volume by level, mass by density and a ready strapping table — for horizontal and vertical cylinders, rectangular and spherical tanks.

4 tank shapes Table step from 1 mm Excel export Mass by density
1Tank type
2Heads
3Dimensions
mm
mm
mm
mm
mm
4Level and product
mm
kg/L
Enter also calculates
Enter the tank dimensions and press “Calculate”
Inputs changed — press “Recalculate” to update the result

Your tank

level not set
Total volume— 
Volume at level— 
Fill level—
Product mass—free: —

Calibration curve

The formula appears after calculation

Strapping table

after calculation
Level, mmVolume, L
Press “Calculate”

Need to calibrate tanks regularly?

Order the KPR10-01 calibration kit from Gerkon — complete equipment for volumetric tank calibration: reference measuring vessels, dosing pump, fittings, hoses. Pays for itself in 2-3 calibrations vs hiring a third-party lab.

View KPR10-01 →

Need an official strapping table with metrology certificate?

Gerkon performs full tank calibration as a service on-site: measure real dimensions, build 1 cm step table, issue UkrMetrTestStandart verification protocol. Suitable for commercial and excise accounting.

Order service →

What is tank calibration (strapping)?

Tank calibration produces a strapping table that converts a liquid level (in centimetres) to a volume (litres). Without one you cannot know how much fuel sits in a service-station or terminal tank, because most geometries are non-linear — especially horizontal cylinders with ellipsoidal heads. This calculator gives an estimate from nominal dimensions; for official accounting (commercial or excise) a physical calibration with metrology certification is required.

The level for the table is measured with an MShS dipstick or a UZG gauging tape, or continuously, without opening the hatch, with the SYW-A magnetostrictive level gauge.

Frequently asked questions

What is the difference between flat, hemispherical and ellipsoidal heads?
Flat heads — simplest type, volume equals cylinder body. Hemispherical — hemispheres of radius equal to tank radius (two heads make one full sphere). Ellipsoidal — industry standard for horizontal service-station tankers: head depth typically 25-40% of radius. Ellipsoidal heads add 5-10% volume to the cylindrical body.
Why does volume grow non-linearly with level in a horizontal cylinder?
The cross-section area depends on level — narrow at bottom and top (geometrically a circular segment), maximum at the middle. So 10 cm of level at the bottom contain much less volume than 10 cm at the middle. Vertical cylinders and rectangular tanks have linear behaviour.
How does the horizontal-cylinder formula work?
V = L × (R² × arccos((R−h)/R) − (R−h) × √(2Rh − h²)), where R is radius, L length, h level from bottom. This is the classic circular segment area times length. Filled-head volume is added on top.
Can I use this calculation as an official strapping table?
No. This is for estimation only. An official strapping table (for fuel accounting, excise, commercial settlements) is produced by physical volumetric calibration — filling with reference measuring vessels. Gerkon provides this as an on-site service with UkrMetrTestStandart verification protocol.
What table step is required?
Standard step is 1 cm. Very large tanks (>1000 m³) may use 2-5 cm. The calculator builds 1 cm step tables compliant with DSTU GOST 8.346 for petroleum products. CSV export opens in Excel where you can add temperature/tilt corrections.

The calculator uses nominal dimensions. Real tanks have construction tolerances, pressure/temperature deformations, may sit at an angle. Official accounting requires physical volumetric calibration with verification.